U.S. airspace classes: side view
A cross-section from the ground up to the flight levels, showing where each class can exist. Heights are schematic, not to scale; airports are drawn at sea level.
Open the 3D airspace map · A teaching tool from FLY8MA
Not to scale. Paired numbers such as 40 / 12 are ceiling over floor in hundreds of feet MSL, as printed on sectional charts; SFC means the surface. Example: a Class C built to the standard at an airport 1,000 ft above sea level would be charted about 50 / 22, not 40 / 12.
| Class | Floor | Ceiling | Shape and where it is found |
|---|---|---|---|
| A | 18,000 ft MSL | FL600, inclusive | One blanket layer over the 48 states, Alaska and coastal waters out to 12 NM. Not drawn on sectional charts. |
| B | Surface at the core; each outer shelf starts higher | Commonly 10,000 ft MSL; some are lower or higher | An upside-down wedding cake around the busiest airports. Every Class B is designed individually, so the number of shelves and their floors differ. |
| C | Surface in the 5 NM core; 1,200 ft above the airport in the shelf (charted in MSL) | 4,000 ft above the airport (charted in MSL) | Usually two tiers: a 5 NM surface core and a shelf out to 10 NM. |
| D | Surface | Generally 2,500 ft above the airport (charted in MSL) | A single cylinder, about 4 NM in radius, around an airport with an operating control tower. |
| E | Surface, 700 ft AGL, 1,200 ft AGL, or 14,500 ft MSL | Up to, but not including, 18,000 ft MSL; begins again above FL600 | All remaining controlled airspace. It drops to 700 ft AGL or the surface around airports with instrument approaches. |
| G | Surface | The floor of the Class E above it: 700 ft AGL, 1,200 ft AGL, or 14,500 ft MSL | Uncontrolled airspace beneath Class E. Where Class E starts at 14,500 ft MSL, Class G still extends to 1,500 ft AGL over higher terrain. |
Training illustration. The data here is not considered an official source, and this does not replace FAA-approved pre-flight planning tools.